TS 113 Mechanical pump seals from China manufacturer - Ningbo Tisun Seals Industries Co., Ltd.

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: TS113

Production Capacity: 50-100 each month

Delivery Date: as per the quantity(15-25 d...

function:: for pump

product:: PTFE Wedge mechanical seals

Pressure:: ≤2.5Mpa

Means of Transport: Ocean,Land,Air

Packing: carton

Brand Name: TiSun

expRegion:: America, UN, east asia,mide...

Temperature:: -40oC~250oC

Speed:: ≤ 20 m/Sec

Operating limits
Specification: 20~65mm
Pressure: ≤1.2Mpa
Temperature:- -20~180℃
Linear speed:≤15m/s
Axial movement:±0.5mm

Model:
Introduction:

Profile
Single seal/Unbalanced/Dependent on direction of rotation
Seal series is mainly used in chemical pumps, sewage pumps , industrial pumps , ect . For normal corrosive medium. Its rotaing seal uses pin or holding screw to achieve reliable drive. Its axial size is small and has a high interchangeability. It is suitable for viscous medium.
Operating limits
Specification: 20~65mm
Pressure: ≤1.2Mpa
Temperature:- -20~180℃
Linear speed:≤15m/s
Axial movement:±0.5mm
Combination of materials
Sealing face : Gradphite,Silicon carbide, Tungsten carbide, Aluminun oxide
Secondary sealing:Acrylonitrile rubber, Fluorine rubber, Ethylene propylene rubber, PTFE
Metal component : Stainless steel

unit:mm

Seal operation notice:
1: after pump start-up if there is a slight leakage phenomenon, should be observed for a period of time.Such as 4 hours of continuous running, still don't reduce the leakage, should stop the pump to check.
2: the operating pressure of the pump should be smooth, pressure fluctuation is not more than 1 kg/cm2.
3: the pump in operation, should avoid to occur, in order to avoid damage in seal face dry friction and sealing.
4: sealing condition check regularly.In operation, when the leak than standard, heavy oil is not more than 5 drops per minute, light oil is not more than 10 / points, such as 2-3 days still no improvement, you should stop the pump to check the sealing device.